3 Important Tips for How to Replace a Whirlpool Refrigerator Filter

3 Important Tips for How to Replace a Whirlpool Refrigerator Filter
Male hand is pouring cold water and ice cubes from dispenser of home fridge.

Are you wondering how to replace your Whirlpool refrigerator filter? Replacing your refrigerator filter can help to keep your water clean, safe, and tasting great, so when it’s time to replace yours, you should do so.

If you’re not sure how to replace your Whirlpool refrigerator water filter, keep reading. In this guide, we will let you in on some tips that can help you replace this feature for the best results.

Table of Contents

1. Prepare for a Replacement

The first step to replacing your water filter is to locate it if you don’t already know where this feature is. Depending on what model of Whirlpool fridges you have, the filter area will be located either inside your refrigerator at the right-hand side of the back door or at the bottom of your fridge. You can also check your fridge user manual if you are unsure of your fridge model and/or filter location.

Then, you should prepare to remove the old filter. You should lay down a towel under the fridge or the filter itself to avoid spiling tons of water as you replace the filter. Remove any food or beverages from the fridge that are not allowing you to fully reach or see the filter area.

If you have an icemaker, make sure to turn it off as you replace your filter. Turning the water supply off can also help to avoid spills during this process.

2. Remove Old Filter

If you have a filter that is located at the grille of your fridge, you should be able to remove it by pressing down on the button to the left of the filter and then pull the filter out. Some filters will not have a button on them but will instead have a feature that you can turn counterclockwise to release the filter. For more models that have the filter located inside the fridge, you simply remove the cover and pull up to remove the old filter.

3. Install the New Filter

Once you have removed the old filter, you can replace it with your new one. Move filters will have a cap that you will need to remove from the old one and adhere to the new one by screwing it on. Depending on the fridge model, you can either fasten the new filter in place by popping it into the designated space or screwing it in.

If there is a button, you simply click the filter into place. When replacing the filter, make sure it is placed just as your old one was for the best results. Once you have adjusted the new filter, flush out the water to make sure the old buildup is flushed out and that fresh and clean water can run out instead.

Head to www.discountfilters.com to shop for yours.

How to Replace a Whirlpool Refridgerator Filter in 3 Easy Steps

If you need to replace your Whirlpool refrigerator filter, keep these tips and tricks in mind to get fresh, clean, and great-tasting water in no time.

Head to the “General” section of our site for more.